Servo motor folder(3mm) and mini gripper for Tower-pro made SG90


Description

This is a servo motor folder.
This is a Tower-pro SG90 made only.
SG90 is inexpensive small servo motor. About $ 3.
SG90 is a friend of 9g servo.

All of the size I am aligned with the 50mm.
This part is <3>mm thick.
*In addition, there is also a <2>mm thickness specification.
http://www.thingiverse.com/thing:714174

I can be mounted at an angle of 90 degrees.
I can be mounted to the arm part.
I will connect the servo in M2 × 8mm bolts and nuts.
I will connect each part in M2 × 8mm bolts and nuts.
Each part of a small gripper Please bonded.

Servo motor folder(3mm) and mini gripper for Tower-pro made SG90 by arrowmeiwaracing is licensed under the Creative Commons - Attribution - Non-Commercial license.

Single File Downloads

Name Type
STL FILE 3m_inner 3m_inner.stl
0.00 KB
STL Download
STL FILE 3m_linner 3m_linner.stl
0.00 KB
STL Download
STL FILE 3m_louter 3m_louter.stl
0.00 KB
STL Download
STL FILE 3m_outer 3m_outer.stl
0.00 KB
STL Download
STL FILE 3m_tunagi50 3m_tunagi50.stl
0.00 KB
STL Download
STL FILE armleft armleft.stl
0.00 KB
STL Download
STL FILE armlight armlight.stl
0.00 KB
STL Download
STL FILE base base.stl
0.00 KB
STL Download
STL FILE sevarm sevarm.stl
0.00 KB
STL Download
Elsita
  • 3510uploads
  • 0questions
  • 0answers

Fileinfo