Functional Differential Gear System


Description

Remixed Differential from Thing-O-Fun. I added the Yoke to make it more realistic. The original files had a lot of play and were not all consistent sizes which are now consistent. I also redesigned the spider gears to accept screws from the outside to allow 4 spider gears to be installed.

Addition:
I added a stand with a motor from here http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2128219_-1. Use the 2 spur gears to drive the entire assembly. Motor can be wired to a USB port.

Functional Differential Gear System by qsopc is licensed under the Creative Commons - Attribution - Share Alike license.

Single File Downloads

Name Type
STL FILE Casing Casing.STL
0.00 KB
STL Download
STL FILE Handle_V2 Handle_V2.STL
0.00 KB
STL Download
STL FILE Input_Pinion Input_Pinion.STL
0.00 KB
STL Download
STL FILE Shaft_v2 Shaft_v2.STL
0.00 KB
STL Download
STL FILE Side_Gear_V2 Side_Gear_V2.STL
0.00 KB
STL Download
STL FILE Side_V2 Side_V2.STL
0.00 KB
STL Download
STL FILE Spider_Shaft_V2 Spider_Shaft_V2.STL
0.00 KB
STL Download
STL FILE Spider_V2 Spider_V2.STL
0.00 KB
STL Download
STL FILE spur_gear_16 spur_gear_16.STL
0.00 KB
STL Download
STL FILE spur_gear_34 spur_gear_34.STL
0.00 KB
STL Download
STL FILE Stand_wMotorMount Stand_wMotorMount.STL
0.00 KB
STL Download
STL FILE Top Top.STL
0.00 KB
STL Download
STL FILE Yoke Yoke.STL
0.00 KB
STL Download
Elsita
  • 3510uploads
  • 0questions
  • 0answers

Fileinfo